CIP 4 Tank

 Cleaning In Place (CIP) with 4 Tank

Fresh Water, Chemical, Detergent and Hot Water

10521

–          Single-use application source of cleaning solution

–          Supply and recirculated

–          Used where water utilities are limited.

–          Reduced wash and rinse cycle times.

–          Any line can be added for supply line and return line.

 

CONTROL

We developed a flexible and easy-to-operate with various type of CIP that allows the customer to manipulate the system hardware to optimize cleaning programs. This can result in shorter cycle times, lower water and chemical usage, more precise control of setpoints, and defined alarms which reduce troubleshooting time

The Process :

  • Water Feeding Cold / Hot Water

  • Chemical water preparation

  • Circulation Heating Function for Hot Water Tank

  • Water Rinse

  • Acid Rinse / Circulation

  • Caustic Rinse / Circulation

  • Hot water Rinse / Circulation

This can result in shorter cycle times, lower water and chemical usage, more precise control of setpoints, and defined alarms which reduce troubleshooting time.

Our Program for CIP System is engineered to your specific plant application and utility requirements for effective and efficient cleaning of process equipment. Proper CIP design and sizing ensures sufficient flow and appropriate pressure to thoroughly remove residue and rinse effectively while also saving cycle time, reducing operating costs, and promoting worker safety.

 

FEATURE

  • Panel Stainless Steel design 1200Hx800Dx400W complete power supply 24VDC, emergency stop button, alarm set hardware, alarm acknowledge

  • Motor Protection for dosing pump and supply pump. GV2-ME & LC1D Schneider

  • Variable Speed Drive for Supply Pump. Schneider or Siemens

  • PLC with Ethernet CPU with Digital and Analog IO. S7-300 Siemens or M340 Schneider

  • 12” Touch screen For Human interface. HMI GTO Magelis Schneider or Simatic HMI Confort Siemens

  • 1 set Solenoid Valve. Burkert or Festo

OPTION

  • PC based for data logging and hystorical data

  • Level Switch with connection Tri-Clamp / SMS. Siemens or EH

  • Temperature sensor with connection Tri-Clamp / SMS, 0-150oC, 4-20mA. Siemens or EH

  • Flow Meter Massflow type. Siemens or EH or Burkert

  • Conductivity  Sensor. EH

  • Flow Switch. EH